Marine generator sets | Authorized distributor in Taiwan
Baudouin 6W105S
6.7 L in-line 6-cylinder marine genset with multiple PRP ratings at 50/60 Hz
80–120/92–136 kWePRP output (50/60 Hz)
1500/1800 rpmSpeed (50/60 Hz)
6.7 LDisplacement
1216–1248 kgDry weight
Features
Features
Individual cylinder heads
According to the manufacturer, individual cylinder heads allow quick servicing and minimal downtime.
Fuel system safety
Double-wall fuel injection pipes with leak detection; duplex fuel filters can be changed while the engine is running.
No derating at class temperatures
According to the manufacturer, ratings comply with the classification societies' maximum temperature definition (45°C ambient, 32°C raw water) without power derating.
Specifications
Full specifications
| Type | Marine generator set |
|---|---|
| Engine cylinders | In-line 6-cylinder (L6) |
| Bore × stroke | 105 × 130 mm |
| Displacement | 6.7 L |
| PRP output (50/60 Hz) | 80/92 kWe |
| Frequency / speed | 50 Hz / 1500 rpm; 60 Hz / 1800 rpm |
| Voltage | 380–415 V (50 Hz); 440–480 V (60 Hz) |
| Emissions (as stated by the manufacturer) | Varies by rating; see ratings table |
| Fuel injection | Mechanical fuel injection |
| Air intake | Turbocharged (dry-type, heat-insulated), raw-water-cooled charge air cooler |
| Cooling system | Two-stage cooling circuit with integrated HT thermostatic valve, tube-type heat exchanger; keel cooling optional |
| Idle speed | 650 rpm |
| Electrical system | 24 V DC insulated system, electric starter, 55 A battery charger |
| Alternator | 50/60 Hz, 4 poles, brushless excitation, electronic voltage regulation |
| Protection / insulation class | IP23, marine impregnation; insulation / heating class H/H |
| Alternator bearing | Single bearing |
| Dimensions | L 2140 × W 1042–1142 × H 1066 mm |
| Dry weight | 1216–1248 kg |
| Power standard | ISO 3046-1:2002 |
Output by duty rating About duty ratings →
| Rating | Frequency Hz | kVA | kWe | Speed rpm | IMO |
|---|---|---|---|---|---|
| PRP | 50 | 100 | 80 | 1500 | — |
| PRP | 50 | 125 | 100 | 1500 | — |
| PRP | 50 | 135 | 108 | 1500 | — |
| PRP | 50 | 150 | 120 | 1500 | — |
| PRP | 60 | 115 | 92 | 1800 | — |
| PRP | 60 | 135 | 108 | 1800 | — |
| PRP | 60 | 143 | 114 | 1800 | — |
| PRP | 60 | 155 | 124 | 1800 | II |
| PRP | 60 | 170 | 136 | 1800 | II |
Notes
- Several PRP ratings are available; see the ratings table.
- PRP (prime power) as defined by the manufacturer: unlimited running hours, no more than 500 hours per year at full load, load variation up to 75% of rated power, and 10% overload available for 1 hour in every 12 hours.
- Emissions are as stated by the manufacturer; applicable certification depends on the delivered version and its certificates.
- Specifications as published by the manufacturer; the delivered configuration and the manufacturer's latest spec sheet govern.
- Where the emissions column shows "—", please contact Hallmark Marine to confirm the applicable emission regulations and certificates.
After-sales in Taiwan | Hallmark Marine Co., Ltd. (Baudouin authorized distributor in Taiwan)
Equipment selection, installation guidance and sea trials, scheduled maintenance and repair, and genuine parts. For parts enquiries, please provide the brand, model, serial number and vessel name. Warranty follows the manufacturer's terms and is decided case by case.
Equipment selection, installation guidance and sea trials, scheduled maintenance and repair, and genuine parts. For parts enquiries, please provide the brand, model, serial number and vessel name. Warranty follows the manufacturer's terms and is decided case by case.