Products and specifications | Authorized distributor in Taiwan
Sonihull Sonihull Xtreme
A large system with up to 16 zone-controlled outputs and transducer cables up to 100 m
Features
Features
Selectable and custom tracks
Choose ultrasonic tracks optimised for specific applications or create custom tracks for special requirements; a scheduler can interrupt the primary track to run a selected track.
Phased outputs
Transducer output signals can be synchronised; according to the manufacturer, this maximises ultrasonic energy.
Operational persistence
Transducers keep operating even if system-level faults occur, and the system returns to its programmed operation automatically once a fault clears.
Modular hardware
Industry-standard DIN-rail components for easy replacement.
Monitoring and logging
LCD showing operating hours and faults; Android app for configuration; SD card storing settings and a time-stamped event log; relays for remote enable and remote fault monitoring.
System integration
Ready to integrate with SCADA, PLC and similar industrial automation systems; can also be configured for solar and battery power.
Dry-side installation
Transducers are bonded with epoxy to the dry side of the hull, sea chests, coolers or pipework, with no through-hull penetrations.
Specifications
Full specifications
| Model code | Xtreme-16 (16-transducer system) |
|---|---|
| Supply voltage | 120–240 V AC (auto-switching); 24 V DC |
| Supply current | 4 A @ 120 V AC; 2 A @ 240 V AC; DC 5–20 A |
| Power consumption | 100 W average; 500 W max |
| Power per transducer output | 4–15 W average; 36 W max |
| Ultrasonic frequency | 18–48 kHz |
| Output voltage / current | 100–300 V AC; 50–150 mA |
| Ultrasonic transducers | Up to 16 outputs; up to 16 transducers |
| Transducer cable length | 7.5 m (extendable to 100 m) |
| Transducer options | Standard, submersible (20 m / 40 m cable), high-temperature, ATEX and submersible ATEX; IP68 protection |
| Enclosure | Rittal AE1045 |
| Control unit dimensions (H×W×D) | 500×400×210 mm |
| Control unit weight | 17.5 kg |
| Control unit protection | IP66, NEMA 4, IK08 |
| Cable glands | 19 × 15 mm glands for cables up to 8 mm diameter |
| Enclosure approvals | BV, RRR, UL + C-UL (enclosure approvals, not system or performance certifications) |
| Hazardous-area installation | Optional Exd flameproof enclosure certified to ATEX/IECEx |
| Communication | RS-485 (Modbus RTU); Ethernet 10/100 (requires additional hardware and integration) |
Notes
- The number of transducers is configured after assessing vessel type, structure and areas to be protected.
- The 16 outputs can be set individually or in groups to run different programmes for each protected area.
- The system prevents biofouling; it cannot remove established hard fouling, so surfaces must be cleaned before installation.
Equipment selection, installation guidance and sea trials, scheduled maintenance and repair, and genuine parts. For parts enquiries, please provide the brand, model, serial number and vessel name. Warranty follows the manufacturer's terms and is decided case by case.