Marine generator sets | Authorized distributor in Taiwan

Baudouin 4M05

2.5 L common-rail marine canopy genset, PRP 20–35 kWe (50 Hz)

20–35 kWePRP output (50 Hz)
1500 rpmSpeed (50 Hz)
2.5 LDisplacement
589–595 kgDry weight

Enquire about 4M05View full specifications

Features

Features

Individual cylinder heads

According to the manufacturer, individual cylinder heads allow quick servicing and minimal downtime.

Paralleling controller

Paralleling controller with 5" colour display as standard, for single or multiple genset operation and generator parameter monitoring.

Fuel system safety

Double-wall fuel pipes with fuel leak alarm, plus an electric fuel lift pump.

No derating at class temperatures

According to the manufacturer, ratings comply with the classification societies' maximum temperature definition (45°C ambient, 32°C raw water) without power derating.

Specifications

Full specifications

4M05 specifications
TypeMarine canopy genset
Engine cylindersIn-line 4-cylinder (L4)
Bore × stroke90 × 98 mm
Displacement2.5 L
PRP output20–35 kWe (50 Hz)
Frequency / speed50 Hz / 1500 rpm
Voltage380–415 V
Emissions (as stated by the manufacturer)—
Fuel injectionHigh-pressure common-rail electronic injection
Cooling systemTubular heat exchanger with integrated freshwater expansion tank; raw water discharged through the exhaust elbow
Idle speed700 rpm
Control systemParalleling controller (5" colour display), single or multiple genset operation, generator parameter monitoring
Alternator50 Hz, 4 poles, brushless excitation, electronic voltage regulation
ProtectionIP23, marine impregnation
Alternator bearingSingle bearing
DimensionsL 1356–1370 × W 660 × H 770 mm
Dry weight589–595 kg
Noise level73 dBA
Power standardISO 3046-1:2002

Output by duty rating About duty ratings →

RatingFrequency HzkVAkWeSpeed rpmIMO
PRP5025201500—
PRP5035281500—
PRP5044351500—

Notes

  • Several PRP ratings are available; see the ratings table.
  • PRP (prime power) as defined by the manufacturer: unlimited running hours, no more than 500 hours per year at full load, load variation up to 75% of rated power, and 10% overload available for 1 hour in every 12 hours.
  • Emissions are as stated by the manufacturer; applicable certification depends on the delivered version and its certificates.
  • Specifications as published by the manufacturer; the delivered configuration and the manufacturer's latest spec sheet govern.
  • Where the emissions column shows "—", please contact Hallmark Marine to confirm the applicable emission regulations and certificates.
After-sales in Taiwan | Hallmark Marine Co., Ltd. (Baudouin authorized distributor in Taiwan)
Equipment selection, installation guidance and sea trials, scheduled maintenance and repair, and genuine parts. For parts enquiries, please provide the brand, model, serial number and vessel name. Warranty follows the manufacturer's terms and is decided case by case.

Enquire about 4M05Parts enquiry

Need equipment selection or service?